Menu If you want to connect the SRC to a different network or if you are having trouble setting up your SRC, follow the steps below:

• Press and hold the reset button for 5 seconds.
  
• Confirm the LED indicator is flashing rapidly.
• Add the device again using the App.

---

NOTE:
If you are still unable to set up your SRC please reset it to slow flashing mode :

• Press and hold the reset button for 5 seconds. Wait for the LED indicator to flash rapidly.
• Again, press and hold the reset button for 5 seconds.
• Confirm the LED indicator is flashing slowly.

Using the Lloyd's APP
Click on  Add device  or  + 
Select your product type: "Confort" "SMART IR".
Select your 2.4 GHz WIFI network and enter the password.
Select "Slow flashing"
Follow the instructions within the App.
If switching to the newly created network from the Lloyd's Smart App fails, please connect to the new network by opening the WIFI settings on your phone and selecting the network.
Support: [email protected]