LE-220BL

360° ceiling motion sensor

Photocell and timer for lighting when you pass by

Turn on your light when motion is detected in darkness

Ask on WhatsApp

Key specs

Range: Up to 6 m, depending on installation and temperature
Power: 127 V AC, 60 Hz

Already have it? See how to set it up →

Buy at the official store

Also at

More photos

What it does

360° coverage
Detects motion around the sensor up to 6 m away, depending on conditions.
Low-light activation
The photocell switches on the light when ambient light falls below 10 lux.
Selectable timing
Choose 30 seconds, two minutes or six minutes of lighting.
Test mode
The five-second setting helps you check installation.
Ceiling mounting
Install 2 to 4 m above the floor with a wired electrical connection.

Description

Lighting when you enter a dark area

The LE-220BL detects motion through 360° and activates the connected light when ambient light is below 10 lux. Detection reaches up to 6 m, depending on installation and temperature, for automated lighting in corridors, rooms or walkways.

Choose 30 seconds, two minutes or six minutes of lighting. A five-second test mode helps check operation. The white sensor measures 11.4 cm in diameter and 5.7 cm high, as shown in the dimension photo.

It requires a wired 127 V AC, 60 Hz connection and installation at a height of 2 to 4 m. The stated maximum load is 800 W; check your light’s compatibility before connecting. An electrician is recommended. Avoid air conditioning, heaters and areas with sudden temperature changes.